Brother PT-9500PC - Manual (Page 282)

47
Installing the
sof
tware
Using Mac OS 8.6-9.x
Follow the following procedure to install the software on a Macintosh running Mac OS 8.6-9.x.
■ Creating labels with various designs
Refer to “Installing P-touch Editor and the printer driver” (below).
■ Printing labels simply
Refer to “Installing P-touch Quick Editor and the printer driver” (
→ P.49).
Installing P-touch Editor
and the printer driver
Install P-touch Editor 3.2, to design labels, and
the printer driver software.
1
Start the Macintosh, and then insert the
CD-ROM into the CD-ROM drive.
→The P-touch window appears.
2
Double-click the Mac OS 9 folder.
→The Mac OS 9 window appears.
3
Double-click the P-touch Editor 3.2
folder.
→The P-touch Editor 3.2 window
appears.
4
Double-click the P-touch Editor 3.2
Installer icon.
→The Installer starts.
5
Confirm the drive to install the software
to, and then click [Install].
To change the drive, click [Drive].
Clicking Custom Install displays a dialog
box that allows you to select which
options to install. Only the options with a
check mark beside them are installed.
Clear the check marks from the programs
you do not want to install.
Note
● Do not connect the USB interface cable
to the Macintosh until the software has
been installed and the Macintosh has
been restarted. If the USB interface cable
is already connected to the Macintosh,
remove the USB interface cable.