Brother PT-9500PC - Manual (Page 272)

37
Installing the
sof
tware
4
Click the button for Driver.
→The Driver Setup dialog box appears.
5
Select “Serial cable”, and then click
[OK].
→The Driver Setup (Brother
PT-9500PC) dialog box to indicate
setup will begin appears.
6
Select “Install”, and then click [Next].
→The dialog box to select the port that
the PT-9500PC will be to connected
to appears.
7
Select the port that the PT-9500PC will
be connected to, and then click [Next].
→The dialog box to confirm the
installation information appears.
8
Confirm that the driver and port are
correct, and then click [Next].
To correct the installation information,
click [Back].
→Installation begins.