ROTRONIC XB OEM - Manual (Page 5)

E-M-XB-V1_10
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
Instruction Manual
Document Type
XB Humidity Temperature Transmitter
User Guide
Document title
Page 5 of 27
© 2008; Rotronic AG E-M-XB-V1_10
1 2 3 4 5 6 Probe length options
S Standard length : 100 mm
1 Standard length + 150 mm
2 Standard length + 300 mm
3 Standard length + 450 mm
4 Standard length +600 mm
Standard dew / frost point output ranges
X X No calculated parameter
B X -50…50 (°C / °F - as per temperature output range)
C X -50…100 (°C / °F - as per temperature output range)
D X -50…200 (°C / °F - as per temperature output range)
S C Custom range. Specify when ordering
Notes:
o
Output 1: relative humidity or dew point
o Output 2: temperature
o
The dew / frost point range uses the same unit (˚C or ˚F) as the temperature output. The factory default
setting is frost point below freezing.
o
Custom range: be sure to clearly specify the desired range at the time of the order. When a special range
has been ordered, the letters ST and SC are used in columns 4 and 7 in the above table. These generic
codes will be replaced with a specific code only for quantity and repeat orders