Milestone LPR 1.0 - Manual (Page 40)

Milestone XProtect
®
LPR 1.0 Administrator's Manual
www.milestonesys.com 40 LPR Server Services
Show LPR server log
Logs are very useful tools for monitoring and troubleshooting the status of the LPR service. All entries
are time-stamped, with the most recent entries at the bottom.
1. Right-click the notification area's LPR Server Manager icon.
2. From the menu that appears, select Show LPR Server Log File...
3. A log-viewer appears listing all relevant server activity with precise time stamp.
Change LPR server settings
The LPR server must be able to communicate with your XProtect Management Server. You must
therefore specify the IP address/hostname of the Management Server during the installation of the
LPR server.
Should you later need to change the address of the Management Server, do the following:
1. Stop (see "Start and stop LPR Server Service" on page 39) the LPR Server Service.
2. Right-click the notification area's LPR Server Manager icon again.
3. From the menu that appears, select Change Settings... The LPR Server Service Settings
window appears.
4. Specify the following properties:
Address: Enter the IP address (example: 123.123.123.123) or host name (example:
ourserver) of the Management Server with which the LPR server communicates.
Port: Enter the port number of the Management Server that the LPR server communicates
with. Default port number is 80.
User name: Enter the user name for the LPR server login.
Password: Enter the password for the LPR server login.