Milestone LPR 1.0 - Manual (Page 14)

Milestone XProtect
®
LPR 1.0 Administrator's Manual
www.milestonesys.com 14 LPR servers, sources and lists
LPR camera settings
From the LPR Camera Information window, you can configure LPR settings for the selected camera.
Info tab
Here the selected LPR camera is identified:

Enabled: LPR cameras are by default enabled meaning that they are used for LPR. If a
camera should not be used for LPR, you must disable it.
Disabling LPR on a camera does not stop it from performing normal recording in XProtect
Corporate or XProtect Enterprise.

Camera: Name of the selected camera as it appears in the XProtect Management Client or
Managemement Application as well as in clients.

Description: Enter a description (optional).

Change Server...: Click to change LPR server.
Tip: Changing LPR server might be a good idea with regards to load balancing. For example,
if an LPR server is beginning to max out on CPU load, moving one or more LPR cameras to
another LPR server is recommended.
Settings tab
The Settings tab consists of a Select Image... button (see "Select image for test" on page 15) and a
number of sub-tabs for recognition settings:

Recognition Area (see "Recognition Area tab" on page 15)

Character Height (see "Character Height tab" on page 17)

Reading Direction (see "Reading Direction tab" on page 17)