Milestone Analytics 2.2 Generic VA - Manual (Page 24)

Milestone XProtect Analytics 2.2 – Generic VA; Administrator’s Manual
www.milestonesys.com Page 24 Generic VA Administrator
Tip: Note the MAC address for this machine field. The field lists the MAC (Media Access
Control) address of the computer on which XProtect Analytics is installed. The MAC address
uniquely identifies the
computer. If you later need to
get a new license—for example
if you need to use more
cameras than covered by your
original license—your Milestone
vendor is likely to ask you for
the MAC address.
3. In the Software License Code (SLC) field, specify your SLC. Then click the Set button.
4. In the Connection License Key (CLK) field, specify your CLK. Then click the Set button.
5. Save your new settings by clicking the Save button in the Administrator application’s
toolbar.
Note that when certain settings have changed, the Generic VA
Server service must be restarted. To verify whether this is
required, look at the server service status indicator in the bottom right corner of the
Administrator application.
In case restart is required, click the Restart Server button in the Administrator
application’s toolbar.
6. You now have a fully working version with which you can use as many connections as
allowed by your CLK:
Specifying New CLK to Extend Number of Connections
1. In the Administrator
application, expand the
License management folder.
2. Click the blue Entered CLK
allows for # connections text
to access the License
management features.
Tip: Note the MAC address for this machine field. The field lists the MAC (Media Access
Control) address of the computer on which XProtect Analytics is installed. The MAC address
uniquely identifies the computer. If you later need to get a new license—for example if you
need to use more cameras than covered by your original license—your Milestone vendor is
likely to ask you for the MAC address.
3. In the Connection License Key (CLK) field, overwrite the old CLK with the new one. Then
click the Set button.