Badger Meter M-Series M3000 User Manual
Page 21
21
3. Next, press E.
4. Screen METER SETUP 10 opens.
METER SETUP 10 is another List screen it provides access
to common meter parameters.
1. Maneuver the + or – magnetic switches or push buttons
to position the arrow at a selection.
2. For example, place the arrow at Pipe Dia. by pressing or
activating + button once.
3. Press E to open the Pipe Dia. screen.
4. Screen Pipe Dia. 11 opens.
PIPE DIA. 11 is another List screen. It requires a parameter
selection.
PIPE DIA. 11 is a list of pipe diameter sizes.
PIPE DIA. 11
---------------
Exit this Menu
6mm [1/4"]
8mm [5/16"]
10mm [3/8"]
15mm [1/2"]
20mm [3/4"]
25mm [1 "]
32mm [1 1/4"]
40mm [1 1/2"]
50mm [2"]
65mm [2 1/2"]
80mm [3"]
100mm [4"]
125mm [5"]
150mm [6"]
200mm [8"]
250mm [10"]
300mm [12"]
350mm [14"]
400mm [16"]
>450mm [18"]
500mm [20"]
550mm [22"]
600mm [24"]
5. Press + or – to position the arrow at the appropriate pipe
size.
6. Press E.
7. A screen, with the statement [(xx mm [xx”] ]
**SELECTED** appears for about 2 seconds.
It verifi es that the selected pipe diameter size parameter
was entered into the amplifi er settings.