Alicat Flow Vision SC - Manual (Page 28)

28
Once you have selected a parameter, assign it a color using the “Color” field
below the parameter field.
Again, click the down arrow to the right of the “Color” field to display a list of
available colors from which to select.
With the color selected, press the “Add Series” button to add the parameter to
the “Series” section of the New Chart window.
Each series represents a charted line. You can repeat the “New Series” step
for as many parameters you would like to chart from as any units you have
connected.
You will notice that the color of the text defining the charted parameter in the
series field will correspond to the color of its line on the chart.
A series can be removed by placing a check mark in the box next to the series
name in the Series field and pressing the “Remove Selected” button.
Once satisfied with your selections, press the “Add Chart” button to add the
chart to the list of available charts in the Chart module.
After you have added the chart, the New Chart window will disappear from
your screen.