Alicat Flow Vision SC - Manual (Page 24)

24
First, name the data log. This is done by entering a name into the text box to
the right of “Log Name:”.
Next, using the drop down arrow next to the “File Type:” indicator, select the
type of log file you would like.
After you have selected the log name and the type of log file, you will need to tell
Flow Vision™ SC where you would like to save the file and under what name.
Next, define the unit (data source) and the parameters you want to log. To do
this, click the “Data” tab on the top of the New Log window.
Define a data source by clicking the arrow on the right side of “Device:” in the
“New Data Source” section on the bottom portion of the window. Choose the
device from which you will be logging data.
In the “Parameter” section, place check marks next to the parameters you wish
to log.
Note: Not all parameters are applicable to all Alicat devices.
Finally, click the “Add Source” button and the device, along with the selected
parameters, will appear on the top portion of the window.