Alicat Flow Vision SC - Manual (Page 16)

16
Use the arrow to the right of the blank space entitled “COM Port:” to select
the com port to which your device is attached. By default your unit will come
with the unit identifier A. (For information on unit identifiers please consult the
product manual that accompanied your Alicat instrument).
If your unit identifier is not A, select the appropriate identifier.
Once the proper selections have been made, select “Find Device >” and Flow
Vision™ SC will look for the attached instrument. The process make take a few
moments. A successfully added a device will be visible in the Devices tab.
Searching for Devices
To search for devices connected to your computer choose the “Search” option
from the “Devices” menu.
Note: If you do not see the “Search” option in the “Devices” menu click the
down arrow for more options.
After selecting the option, the “Search for Devices” window will open.
Select the number of devices connected to your system. After Flow Vision™
SC finds this number of devices it will stop searching.
The “COM ports” box lists the available ports on your system. Ports that Flow
Vision™ SC determines may have devices connected are checked.
Check any other ports you would like to search.
Finally, choose the range of identifiers you would like to check for. Click the
“Search >>” button.
Flow Vision™ SC will locate and load devices matching the selected
parameters. Once you have successfully added a device, it will be visible in
the Devices tab.