West Control Solutions N4400 - Manual (Page 2)

PREFACE
This manual is intended for use in support of day-to-day operation of
the
1
4
-DIN Setpoint Programmer. For information on installation,
commissioning, configuration etc., refer to the associated Site
Manual (see below).
Associated Documents
Title Part No.
1
4
-DIN Setpoint Programmer Site Manual 59xxxx
In normal operation, the operator must not remove the Setpoint
Programmer from its housing or have unrestricted access to the rear
terminals, as this would provide potential contact with hazardous live
parts.
Installation and configuration must be undertaken only by personnel
who are technically-competent and authorised to do so. This is
covered in the Site Manual (see above).