Techne TC-PLUS - Manual (Page 60)

58
VIEWING A PROGRAM FILE
• Touch Programs And Logs to display Only
Programs.
• Search for the required program file and touch it to
highlight it.
• Touch View to open the temperature profile (Pre-
run Screen) of the program.
• Touch Start to start the program.
Note: It is not possible to send a program to a
connected Satellite unit from the View screen.
• Touch Edit to edit the program.
• Touch Back to return to the previous screen.
Note: The temperature log will remain blank until the
program has been started.
VIEWING A TEMPERATURE LOG FILE
It is not possible to view a temperature log file on the
TC-PLUS. It must first be copied to a USB memory
stick then viewed on a PC using the Techne
Workbench software, which can be downloaded free
of charge from www.techne.com
• See the directions given in the next section for
copying files to a USB memory stick.
• Copy the files to a PC and open the Workbench
software.
• Use Settings to select the path for the saved files or
click on Open to browse for the saved files.
• Select the required temperature log and click Open.
Note: Since the .temperaturelogdata file is a text file,
it can also be opened in applications such as Excel
for further analysis.