Techne TC-PLUS - Manual (Page 40)

38
CREATE A NEW PROGRAM
From the Home Screen, touch the Create A New Program button. This will open a screen where you
can build a program by adding stages and steps and define the temperatures and hold times.
The function of each of the buttons on this screen is
described below.
NAME THE PROGRAM
• Touch this button to give the program a name.
• Type in the required name using the text entry
screen.
• Once the name is complete, touch OK to return to
the programming screen.
• Touch Cancel to return to the programming screen
if no changes are required.
When saving the program, if the chosen name has
already been used for another program, the message
box shown opposite will appear.
• Touch OK to return to the Programming screen.
• Touch the program name and enter a different
name.
• Once the name is complete, touch OK to return to
the programming screen.
• Touch Save to save the program.