Techne TC-PLUS - Manual (Page 33)

31
INSTRUMENT SETTINGS
Temperature Log Recording
To record the temperature logs (block temperature
profile) of each run, touch the button to set this to
Always. If temperature logs are not required, set to
Never.
Auto Resume On Power Loss
This determines the time limit after which the unit will
restart after a power failure. For example, if the Auto
Resume is set to 30 minutes, the unit will restart at the
beginning of the step at which it was interrupted if the
power failure lasted for 30 minutes or less but not if it
was for longer.
Setting Auto Resume to Always will always allow the
unit to re-start irrespective of the length of the power
failure.
Date and Time Settings
Use these settings to set the current date, time and
date format on the unit. The time and date can also be
synchronised with that of a PC if one is connected.
• When set, touch Back to return to the Settings
menu.
Date
• Touch Set Date in order to enter the current date.
• Use the + and – keys to set the date values.
• When the correct date has been set, touch OK to
return to the previous screen.
• Touch Cancel to return to the previous screen if no
changes are required.