Spectrex Quasar 900 Open-Path Gas Detection System - Manual (Page 68)

SafEye TM Quasar 900 Gas Detector
56 Sunshade P/N 888263
This is an I.S. approved Hand-Held with I.S. harness and converter to suit
the detector and programmed with a special host for maintenance and
commissioning.
B.5 HART Hand-Held Diagnostic Unit P/N 888810
HART Hand-Held diagnostic unit fitted with harness to the quick plug
connection which provides easy and economical connection. The HART
Hand-Held will provide verification, status and instructions for correcting the
detector’s parameters.
This is an I.S. approved Hand-Held with a special harness to suit the
detector and a host for maintenance and commissioning.
B.6 HART Hand-Held Harness Kit P/N 888815
A quick plug connection with harness which is connected on one side to a
standard HART Hand-Held unit and includes Spectrex host software that can
be uploaded to an existing Hand-Held (does not include the Hand-Held).
B.7 USB/RS485 Harness Converter Kit P/N
794079-8
The USB RS485 Harness Kit with RS485/USB converter, used with Spectrex
Host software, enables the user to connect to any available PC or laptop to
re-configure settings or perform diagnostics on the Quasar 900 gas
detector.
Refer to manual TM 888050 for programming instructions when using the
USB RS485 Harness Kit.
B.8 Mini Laptop Kit P/N 777820
The mini laptop, pre-loaded with Spectrex software, enables the user to re-
configure settings or perform diagnostics on all flame and gas detectors
series.
Refer to manual TM777070 for programming instructions when using the
Mini Laptop Kit. The kit includes cable harness with RS485/USB converter.
The mini laptop is programmed with maintenance winhost for all detectors'
type.
B.9 Sunshade P/N 888263
The Sunshade is designed to protect the detector from the heat of the sun.