3 detector default setup, Detector default setup, Table 6: detector default set up – Spectrex Quasar 900 Open-Path Gas Detection System User Manual
Page 30: Table 7: source default set up
SafEye
TM
Quasar 900 Gas Detector
18
System Setup
3.4.3 Detector Default Setup
The Detector has 8 functions that can be programmed according to the
customer requirement at factory or at customer facility using a software
Host or a handheld unit. The standard set up is as follows:
Table 6: Detector Default Set Up
Function
Setup
Gas Type
1
BG Zero Calibration
Enabled
0-20mA
Continuous
Heat mode
Auto
Heat on
5
Table 7: Source Default Set Up
Function
Setup
Heat mode
Auto
Heat on
5
The Source default can be changed with the same Host.