Spectrex 20/20MPI - Commercial IR3 Flame Detector - Manual (Page 58)

SharpEye TM IR3 Flame Detector User Guide
46 Operating Instructions
B.2 Unpacking
When unpacking the fire simulator, check that the following items are
included:
 Fire Simulator with built-in batteries
 Delivery form
 Battery charger
 Optional Beam Collimator
 Storage Case
B.3 Operating Instructions
Warning: Do not open the Fire Simulator to charge the batteries
or for any other reason in a hazardous area.
CAUTION: The following test will simulate a real fire condition and may
activate the extinguishing system or other alarms. If this is not desired,
disconnect/inhibit them before the test and reconnect after the simulation.
Figure 13: Mini IR3 Detector Target Point
➣ To simulate a fire:
1 Aim the Fire Simulator towards the detector’s Target Point.