Spectrex 20/20MPI - Commercial IR3 Flame Detector - Manual (Page 29)

TM 20/20MPI, Rev (D) September 2013
Detector Mode Setup 17
Table 8: Time Delay
Delay (seconds)
0
A – anti-flare
3 (default)
5
10
15
20
30
Note: The FM approval does not allow use of 20, and 30 second setting
delay.
4.3.2.3 Function Setup
You can select the desired mode of operation by means of the host.
Table 9: Function Setup
Name Yes No
1 Alarm Latch Alarm latching enable Alarm latching disable
(default)
2 Automatic BIT Automatic BIT
(default) No BIT
4.3.2.4 Addresses Setup
Refer to TM 768050 for instructions for defining the addresses of the
detectors.
The detector provides up to 247 addresses (from 1 to 247) that can be used
with RS-485 communication link.