About this guide – Spectrex 20/20MPI - Commercial IR3 Flame Detector User Manual
Page 5
About this Guide
v
About this Guide
This guide describes the SharpEye Model 20/20MPI Mini Triple IR (IR3)
Flame Detector and its features and provides instructions on how to install,
operate and maintain the detector.
This guide includes the following chapters and appendixes:
Chapter 1, Introduction, provides a general introduction and overview
of the product.
Chapter 2, Technical Description, describes the detector’s features
and principles of operation.
Chapter 3, Performance, describes the detector’s detection sensitivity
and capabilities.
Chapter 4, Operation, describes the detector’s operation modes, user
interface and indications.
Chapter 5, Technical Specifications, lists the detector’s electrical,
mechanical and environmental specifications.
Chapter 6, Installation Instructions, describes preparations for
installation, wiring and mode settings.
Chapter 7, Operating Instructions, show how to power-up and test
the detector.
Chapter 8, Maintenance and troubleshooting, describes basic
maintenance procedures, and support procedures.
Appendix A, Typical Wiring Configurations, lists the wiring
instructions for connecting the detector and provides examples of typical
wiring configurations.
Appendix B, Long Range IR3 Fire Simulator, describes the fire
simulator that can be specifically used with SharpEye IR3 flame
detectors.