Spectrex 40/40U-UB - UV Flame Detector - Manual (Page 14)

SharpEye TM UV Flame Detector User Guide
2 Model and Types
The SharpEye 40/40 detectors are designed to operate as a stand-alone unit
directly connected to an alarm system or an automatic fire extinguishing
system. The detector can also be a part of a more complex system, where
many detectors and other devices are integrated through a common control
unit.
1.2 Model and Types
The 40/40U and UB flame detectors are provided in various configurations
depending on:
 UV Models
 Wiring options
 Temperature ranges
 Type of cable entries
 Housing type
 Required approval
The configuration detail is included in the product part number on the
product label and takes the form: 40/40U and UB XXXXX, where XXXXX
defines the model according to the above requirements.
To modify the default or pre-ordered configuration and perform
maintenance tasks, please refer to the HART Protocol TM777030, the
RS-485 Manual TM 777050 or TM777070.
The Part Numbers are defined as:
Note: *Aluminum housing is available in ATEX/IECEx version only.
Table 1 describes the wiring options in detail.
*