Data transfer to pc – KYORITSU 5000 Instruction Manual User Manual
Page 37
― 35 ―
8. Data transfer to PC
¡
IInstall PC software "KEW LOG Soft" on your PC before using
the instrument. Please refer to the instruction manual for "KEW
LOG Soft" which shows how to install the software.
(The instruction manual for "KEW LOG Soft" is contained in the
supplied CD; or click "Start" → "Program" → "KEW" folder.
¡
When connecting the logger to PC for the first time, your PC will
recognize this new hardware and install the USB driver.
Follow the instructions described in the instruction manual for
"KEW LOG Soft" and install it on your PC.
8-1 Connection of USB cable
(1) Connect the USB cable to the available USB port of PC.
(2) Connect the other end of USB cable to the USB terminal on the
right side of this instrument.
Note:
Remove the protective cover of
USB terminal carefully, and
connect a cable to it. When the
cover is damaged, it may
cause poor contact due to
dust, etc.