KYORITSU 5000 Instruction Manual - Manual (Page 23)

― 21 ―
Max. value recording mode: Current set value of 15mA
Max. number of recorded data
Using all 3 channels Using 2 channels Using only 1 channel
330 data 495 data 990 data
1. Power on the instrument, and press
the button.
፧
፧
፧
፧
፧
2. Press the button when "SEt.1" is
displayed on the LCD.
3. The selected recording mode is displayed.
When (Max. value recording mode)
is displayed on the LCD, press the
button to proceed to the next setting.
In case that
, or
isdisplayed on the LCD, press the button.
Then the indication on the LCD flashes.
Press the
or button to change
it to . Press the button.
Setting procedure
Then the instrument goes into Menu mode.
Each button acts as follows at Menu mode.
→ ：Select, Change, Enter
→ ：Return, Cancel
→ ：Switch, Increase set value
→ ：Switch, Decrease set value