KYORITSU 5000 Instruction Manual - Manual (Page 34)

― 32 ―
5. "Auto-power-off":
State of Auto-power-off function is displayed.
O n : Enables Auto-power-off function.
OFF : Disables Auto-power-off function.
¡ Press the button and proceed to
the next step (Time) when not changing
the setting.
¡ To change the setting, press the
button.
Then the indication on the LCD flashes.
Press the
or button to set
the value to the desired one. Then press
the
button to confirm it.
Note The mark is displayed on the LCD
when the Auto-power-off function is disabled.
Be sure to power off the instrument after use.
When it is enabled, instrument is powered off
automatically when 3 min has been elapsed
after the last operation of keys. During a
recording, indications on the LCD disappear
automatically for saving the battery life,
however, a recording is being performed.
6. "Time": Time is displayed.
Can be adjusted within "00:00" to "23:59".
¡ Press the button and proceed to
the next step (Timer) when not changing
the setting.
¡ To change the setting, press the
button.
Then the indication on the LCD flashes.
Press the
or button to set
the value to the desired one. Then press
the
button to confirm it.
Note Connect the instrument to PC and set
time and date via PC software "KEW LOG
Soft".