KYORITSU 5000 Instruction Manual - Manual (Page 36)

― 34 ―
9. Scale value at Channel 2 is displayed.
¡ Press the button and proceed to the
next step (Scale value at Channel 3) when
not changing the setting
¡ To change the setting, press the
button. (Refer to the procedure described
for Channel 1.)
10. Scale value at Channel 3 is displayed.
¡ Press the button and proceed to the
next step when not changing the setting.
¡ To change the setting, press the
button. (Refer to the procedure described
for Channel 1.)
11. Now Setting 2 is complete; "End" is
displayed on the LCD. Press the
button to return to the screen on which
"SEt.2" is displayed.
12. Press the button to get the instrument
ready for a measurement.
፧
፧
፧
፧
፧