KYORITSU 5000 Instruction Manual - Manual (Page 25)

― 23 ―
Capture recording mode: Current set value of 15mA
Max. number of recorded data
Setting procedure
Using only 1 channel
345 data
1. Power on the instrument, and press the
button.
፧
፧
፧
፧
፧
2. Press the button when "SEt.1" is
displayed on the LCD.
3. The selected recording mode is displayed.
When (Capture recording mode) is
displayed on the LCD, press the
button to proceed to the next setting.
In case that
, or
isdisplayed on the LCD, press the
button.
Then the indication on the LCD flashes.
Press the
or button to change
it to . Press the button.
Then the instrument goes into Menu mode.
Each button acts as follows at Menu mode.
→ ：Select, Change, Enter
→ ：Return, Cancel
→ ：Switch, Increase set value
→ ：Switch, Decrease set value