KYORITSU 5000 Instruction Manual - Manual (Page 21)

― 19 ―
Event recording mode: Current set value of 15mA
Max. number of recorded data
Setting procedure
Using all 3 channels Using 2 channels Using only 1 channel
1,600 data 2,400 data 4,800 data
1. Power on the instrument, and press the
button.
፧
፧
፧
፧
፧
2. Press the button when "SEt.1" is
displayed on the LCD.
3. The selected recording mode is displayed.
When (Event recording mode) is
displayed on the LCD, press the
button to proceed to the next setting.
In case that
, or
isdisplayed on the LCD, press the
button.
Then the indication on the LCD flashes.
Press the
or button to change
it to . Press the button.
Then the instrument goes into Menu mode.
Each button acts as follows at Menu mode.
→ ：Select, Change, Enter
→ ：Return, Cancel
→ ：Switch, Increase set value
→ ：Switch, Decrease set value