KYORITSU 4106 User Manual
Page 41
37
Press the “
” Key to return to the Review Screen without deleting data.
Press the “
” Key to delete the whole data. Then a following message
is displayed on the LCD. (Fig.59)
Pressing the “
” Key returns to the SYSTEM_MENU Screen. Another
press of the “
” Key returns to the Main Screen. Memory No. is
restored to “N001”.
10-4 How to transfer the stored data to a PC
The stored data can be transferred according to following sequence.
The special software “KEW Report” should be installed beforehand.
(1) Connect Model 8212 USB to the USB terminal of a PC.
(2) Disconnect the Test Leads from the instrument, and connect Model
8212 USB as shown in Fig.60.
(3) Power on the instrument while setting the Range Switch to any position.
(4) Start the special software “KEW Report” on your PC, and then click
“Download” command. The data in the instrument will be transferred to
your PC. For further details, please refer to the instruction manual for
Model8212 USB and the HELP of KEW Report.
Fig. 59
Fig. 60