Indicator lights, Warning – Alliance Laundry Systems W446I User Manual

Page 24

Operation

38857

Indicator Lights

IN USE

This light will remain on while washer is in use.

RINSE

This light will be on during the rinse portion of the

cycle.

SPIN

This light will be on during the final spin only. Washer

will stop automatically at end of cycle. (SPIN light and

IN USE light will go out indicating end of cycle.)

Leave loading door open after removing laundry.

IMPORTANT: If washer fails to operate properly
after installation, make sure electrical service and
water supply faucets are turned on. Are all the
controls properly set? Have a qualified service
person refer to the wiring diagram (located inside
of washer control hood), check for broken, loose or
incorrect wiring.

Should washer stop, but IN USE, RINSE or SPIN light

remain on, the motor overload protector may have

cycled. Refer to page 33.

The washer will stop (pause) shortly before the first

spin and final spin.

To reduce the risk of bodily injury, do not
remove laundry from washer until all
lights are out, and all moving parts have
stopped.

W092

WARNING