Alliance Laundry Systems W446I - Manual (Page 23)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
21 38857
Step 4: Set Wash Temperature
One Speed Washers
Set at either HOT/NORMAL, WARM/PERM PRESS
or COLD/SPECIAL.
Two Speed Washers
Set at HOT (COLD rinse), WARM (COLD rinse) or
COLD (COLD rinse).
Figure 22
Step 5: Set Fabric/Cycle Selector
NOTE: Setting may be changed at any time during
the cycle.
One Speed Washers
Set at either HOT/NORMAL, WARM/PERM PRESS
or COLD/SPECIAL.
Two Speed Washers
Set Regular loads at NORMAL or PERM PRESS. Set
Delicate loads at DELICATE.
Figure 23
Step 6: Start Washer
Metered Models
Insert money. Place coin(s) in slide and carefully push
in as far as possible and then pull slide out as far as
possible. (IN USE light will come on indicating start
of cycle.)
Figure 24
Nonmetered Models
Push timer knob in (IN USE light will come on
indicating start of cycle.)
Figure 25
W385I W384I
W385I W386I
WARM
WASH TEMPERATURE
HOT COLD
W384I
WARM / PERM PRESS
HOT
NORMAL
COLD
SPECIAL
W385I
ONE SPEED WASHERS TWO SPEED WASHERS
PERM PRESS
FABRIC SELECTOR
NORMAL DELICATE
W386I
WARM / PERM PRESS
HOT
NORMAL
COLD
SPECIAL
W385I
ONE SPEED WASHERS TWO SPEED WASHERS
W297I
D774I
D774I