KROHNE BM 102 EN - Manual (Page 33)

BM 102 33
Returning a device for testing or repair to KROHNE
Your instrument has been carefully manufactured and tested. If installed and operated in
accordance with these operating instructions, it will rarely present any problems. Should you
nevertheless need to return an instrument for inspection or repair, please pay strict attention to
the following points.
Due to statutory regulations on environmental protection and safeguarding the health and safety
of our personnel, KROHNE may only handle, test and repair returned devices that have been in
contact with products without risk to personnel and environment.
This means that KROHNE can only service your instrument if it is accompanied by the following
certificate confirming that the instrument is safe to handle. If the instrument has been operated
with toxic, caustic, flammable or water-endangering products, you are kindly requested:
• to check and ensure, if necessary by rinsing or neutralizing, that all cavities are free from such
dangerous substances,
• to enclose a certificate with the level gauge conforming that it is safe to handle and stating the
product used.
We cannot service your instrument unless accompanied by such a certificate.
Specimen certificate
Company:
Address:
Department: Name:
Tel. No.: Fax No.:
The enclosed level gauge
Type:
KROHNE Order No. or Serial No.:
has been operated with the following process
liquid:
Because this liquid is
water-hazardous
toxic
caustic
flammable
we have
checked that all cavities in the instrument are free from such substances
flushed out and neutralized all cavities in the device
We confirm that there is no risk to humans or environment through any residual liquid contained in
the instrument.
Date:
Signature:
Company stamp: