KROHNE BM 102 EN - Manual (Page 32)

32 BM 102
4.3 Gauge dimensions
The drawing below illustrates standard gauge configurations and overall dimensions.
Housing
Standard,
M16 terminal box* with
flange
Standard, DIN
connector** with
threaded
connection
High
temperature
version
With
inactive
length***
Probe
3: Coaxial
Ø 28 (1.1) 4: Twin cable
Ø 4 (0.15) 2: Single cable
Ø 4 (0.15) 1: Single rod
Ø 8 (0.3) 6: Single cable
Ø 8 (0.3)
Standard counterweight
None Ø45x60
(Ø1¾x2½ )
Ø25x100
(Ø1x4) None Ø12x100 (ؽx4)**** or
Ø45x245 (ؽx9¾)*****
Size of threaded hole in base of counterweight for anchoring
None M8 M8 None M8
Dimensions in mm (inches)
*with a cable fitting M16X1.5 Ш3.5 … Ш8 **with a cable fitting PG11 Ш8…Ш10 DIN43650-A
*** the inactive length (i.e. a non-active extension at the top of the probe) may be supplied with
the following standard lengths : 100 mm or 4”, 200 mm or 8”, 300 mm or 12”, 400 mm or 16”, 500
mm or 20” and 1 m or 40“ – for single cable and single rod probe versions only.
**** where L
> 10m or > 33ft ***** where L < 10m or < 33ft L = ordered probe length