KROHNE MAGCHECK EN - Manual (Page 7)

MagCheck 7
During verification and test of converters as listed above, MagCheck does not need
any external power supply or batteries. MagCheck takes all its power from the field
current of these signal converters. The external power supply supplied with
MagCheck is only needed during download of verification data into a PC.
2.3 Connection diagrams
For use of MagCheck as precision flow signal calibrator for detailed manual
verification of converters Connections to flow head (field coils and electrodes) are
not needed.
Please note!
In the drawing of IFC 010 manual in Sect. 7.5 the jacks X1 and X4 were named wrong:
X1 must be X3 and X4 must be X5!
Connection MagCheck IFC 010 or IFC 020