KROHNE MAGCHECK EN User Manual
Page 10
10
MagCheck
2.6
How to operate the menu
2.6.1 Display in main menu
There are three main menus indicated with x.0.
1 . 0 o p e r a t i o N Menu line
Indication line
I Mo C o m - B u s ) ( Status line for IMoCom connection
f i e l d c u r r e n T + - Status line for field current
In the main menu display, the two last lines represent status lines.
The IMoCom-Bus status line displays the actual status of the IMoCom connection as follows:
()
Two moving brackets
IMoCom present, IMoCom data transfer operating
()
Two static brackets
IMoCom present, no data transmission window present
no
No IMoCom connected
The field current status line displays the actual status of the field current as follows:
+ - Plus, minus
Correct (field current is switching from positive to negative current and vice
versa)
+
Plus
Positive DC or pulsating DC (defective converter, negative half wave
missing)
-
Minus
Negative DC or pulsating DC (defective converter, positive half wave
missing)
No indication
No current (defective converter, no field current)
The indication lines are used to show error messages.
2.6.2 Selecting menus and changing data
Moving the cursor
Cursor position is indicated by grey blinking background
1
. 0 o
p
e r a t i o
n
Cursor to the right 1 . 1 t e s t M I D
→
I M
o
C
o
m
- B
u s
( )
←
I M o C o m- B u s ) (
f i e l d c u r r e n t + - Cursor to the left f i e l d c u r r e n t + -
Changing the numbers
Alternatively the corresponding numerical key can be used
1 . 3 z e r o
s
e t Increase number
1 . 4 s i m u l a t i o n
↑
I M
o
C
o
m
- B
u
s
) (
↓
I M o C o m - B u s ( )
f i e l d c u r r e n t + - Decrease number
f i e l d c u r r e n t + -