Service, 5 returning the device to the manufacturer – KROHNE OPTISENS AAS 2000 EN User Manual
Page 32
6
SERVICE
32
OPTISENS AAS 2000
www.krohne.com
12/2008 • MA AAS 2000 R01 en
6.5 Returning the device to the manufacturer
6.5.1 KROHNE representative
6.5.2 General information
This device has been carefully manufactured and tested. If installed and operated in accordance
with these operating instructions, it will rarely present any problems.
INFORMATION!
Please contact your local KROHNE representative prior to returning this device!
CAUTION!
Should you nevertheless need to return a device for inspection or repair, please pay strict
attention to the following points:
•
Due to statutory regulations on environmental protection and safeguarding the health and
safety of our personnel, manufacturer may only handle, test and repair returned devices that
have been in contact with products without risk to personnel and environment.
•
This means that the manufacturer can only service this device if it is accompanied by the
following certificate (see next section) confirming that the device is safe to handle.
CAUTION!
If the device has been operated with toxic, caustic, flammable or water-endangering products,
you are kindly requested:
•
to check and ensure, if necessary by rinsing or neutralizing, that all cavities are free from
such dangerous substances,
•
to enclose a certificate with the device confirming that is safe to handle and stating the
product used.
.book Page 32 Monday, December 15, 2008 12:43 PM