beautypg.com

Installation – KROHNE OPTISENS AAS 2000 EN User Manual

Page 20

background image

3

INSTALLATION

20

OPTISENS AAS 2000

www.krohne.com

12/2008 • MA AAS 2000 R01 en

Removing the sensor from MAA 2000 slide rail assembly

Disconnect the sensor cable from the MAC 080 converter and the flushing hose from the

solenoid valve.

Pull the sensor out of the slide rail and detach the two clamps.

Clean the sensor housing with a soft brush or cloth. Do not use a wire brush or sharp tools!

Mount the protective cap (or a small plastic bag) on the sensor cable connector.

Blow compressed air through the flushing hose to get rid of the water in the hose and the

sensor.

Place the plastic cap over electrode and flushing head to protect the membrane.

.book Page 20 Monday, December 15, 2008 12:43 PM