beautypg.com

Software capabilities, Basic networking software, Table 2-1. networking software – AT&T DEFINITY 7200 series User Manual

Page 76

background image

2-4

COMMUNICATION SYSTEM NETWORKING — AN OVERVIEW

_

___________________________________________________________________________________________________________________________

_

___________________________________________________________________________________________________________________________

_

___________________________________________________________________________________________________________________________

The networking software has been packaged to accommodate this type of network evolution. Table 2-1
shows the types of software (and their PECs) that must be activated to enable particular types of networks.

Table 2-1. Networking Software

_ _____________________________________________________________________________________

Software

Network Type

_ ____________________________________________________________________

S75/G1 S85/G2

_

____________________________________________________________________

Package PEC Package PEC

_

_____________________________________________________________________________________

_

_____________________________________________________________________________________

Tandem Tie Trunk

Basic

1233-VAS

Basic

1252-RS5

ARS 1233-ARS

(includes

ARS)

_

_____________________________________________________________________________________

MS/T

Uniform Dial Plan

1233-UDP

Multipremises

1252-MP3

_ _____________________________________________________________________________________

ETN

Private Network Access

1233-PNA

ETN (Standard Network)

1252-ET3

_ _____________________________________________________________________________________

DCS DCS

1233-DCS

DCS

1252-DCS

_

_____________________________________________________________________________________











For ETNs, the ETN (Standard Network) or Private Network Access (PNA) packages need be activated only
on the tandem switches. (The ETN [Standard Network] or PNA packages can also be activated in main
switches; these are known as intelligent mains.)

SOFTWARE CAPABILITIES

System 75/Generic 1 and

DIMENSION

/System 85/Generic 2 software packages are equivalent in that they

enable the same type of networks; they are different in the they sometimes use different processes to
produce the same result. Below is an explanation of the networking software, along with System
75/Generic 1 and

DIMENSION

/System 85/Generic 2 software similarities and differences.

Basic Networking Software

The basic software for the

DIMENSION

, System 85, and Generic 2 communication systems contains three

capabilities around which networks are built:

Automatic Route Selection (ARS). ARS is the feature that provides routing of public network calls.
The feature provides automatic selection from an ordered list of trunk groups and access to the first-
available trunk group in the list. The ordered list of trunk groups is called a routing pattern; the trunk
groups on the list are called preferences. Up to 254 routing patterns can be established on the System
75 or Generic 1 communications system; on the System 85 or Generic 2, 64 patterns can be made
available. Each ARS routing pattern has a first-choice preference and one or more alternate preferences
arranged in order of desirability (usually, cheapest to most expensive). For public network calls, ARS
provides capabilities similar to those provided by Automatic Alternate Routing (AAR) for private