Table 8-1. dcp-port data modules – AT&T DEFINITY 7200 series User Manual
Page 162

8-8
DTE CONNECTIONS
_
___________________________________________________________________________________________________________________________
_
___________________________________________________________________________________________________________________________
_
___________________________________________________________________________________________________________________________
Table 8-1. DCP-Port Data Modules
_ ______________________________________________________________________________________
Data Voice
External
Module Terminal Interface
Transmission
Data
Rates
Adjunct
_
______________________________________________________________________________________
_
______________________________________________________________________________________
Data
7404
RS-232C
Asynch, full/half duplex
Low, 300 bps to 19.2 kbps
module
_ ______________________________________________________________________________________
DTDM
7403
RS-232C
Asynch, full/half duplex
Low, 300 bps to 19.2 kbps
7405
_ ______________________________________________________________________________________
703A
7406
RS-232C
Asynch, full/half duplex
Low, 300 bps to 19.2 kbps
data
stand
_ ______________________________________________________________________________________
701A
7407
RS-232C
Asynch, full/half duplex
Low, 300 bps to 19.2 kbps
data
stand
_ ______________________________________________________________________________________
MTDM
None
RS-232C
Asynch, full/half duplex
Low, 300 bps to 19.2 kbps
Synch, full/half duplex
300 bps to 19.2 kbps
_ ______________________________________________________________________________________
MPDM**
None
RS-232
Asynch, full/half duplex
Low, 300 bps to 19.2 kbps
Synch, full/half duplex
300 bps to 19.2 kbps
_
________________________________________________________________
RS-449
Asynch, full/half duplex
Low, 300 bps to 19.2 kbps
Synch, full/half duplex
300 bps to 19.2 kbps and 56 kbps
Synch, full duplex
64 kbps
_
________________________________________________________________
V.35*
Synch, full/half duplex
56 kbps
Synch, full duplex
64 kbps
_ ______________________________________________________________________________________
7400A
None
RS-232D
Asynch, full duplex
300 bps to 19.2 kbps
_ ______________________________________________________________________________________
7400B
Any
RS-232D
Asynch, full duplex
300 bps to 19.2 kbps
7400
_ ______________________________________________________________________________________
* Two V.35 interfaces are available on the MPDM: option 1 allows the DTE to control the DTR lead; option 2 maintains the DTR
lead high at all times. Use option 2 if an automatic calling unit, or a DTE that cannot control the DTR, is involved in the connection.
** Can be provisioned with or without an RS-366 interface.
(Continued)