Table d-2. some ccitt analog standards – AT&T DEFINITY 7200 series User Manual
Page 279

COMMUNICATIONS PROTOCOLS
D-7
_
______________________________________________________________________________________
_
______________________________________________________________________________________
_
______________________________________________________________________________________
Table D-2. Some CCITT Analog Standards
________________________________________________________________________________________________________
Name Title
Equivalent
Standard(s)
________________________________________________________________________________________________________
________________________________________________________________________________________________________
V.3
International alphabet no. 5
ANSI X3.4; FIPS 1-1; ISO 646
________________________________________________________________________________________________________
V.4
General structure of signals of international alphabet no. 5 code for
data transmission over public telephone networks
CCITT X.4; ISO 1155; ANSI X3.15;
FED-STD 1010; FIPS 16-1
________________________________________________________________________________________________________
V.5
Standardization of data signaling rates for synchronous data
transmission in the general switched telephone network
ANSI X3.1; RS-269B; FED-STD 1013;
FIPS 22-1
________________________________________________________________________________________________________
V.6
Standardization of data signaling rates for synchronous data
transmission over leased telephone-type circuit
ANSI X3.1; RS-269B; FED-STD 1013;
FIPS 22-1
________________________________________________________________________________________________________
V.10
Electrical characteristics for unbalanced double-current interchange
circuits for general use with integrated circuit equipment in the field
of data communications
CCITT X.26; RS-423A; FED-STD
1030A
________________________________________________________________________________________________________
V.11
Electrical characteristics for balanced double-current interchange
circuits for general use with integrated circuit equipment in the field
of data communications
CCITT X.27; RS-422A; FED-STD
1020A
________________________________________________________________________________________________________
V.22
1200 bps duplex modem standardized for use on the general switched
telephone network and on leased circuits
FED-STD 1008
________________________________________________________________________________________________________
V.24
List of definitions for interchange circuits between DTE and DCE
RS-232C; RS-449; RS-449.1; RS-266A
________________________________________________________________________________________________________
V.25
Automatic calling and/or answering equipment on the general
switched telephone network, including disabling of echo suppressors
on manually established calls
RS-366A
________________________________________________________________________________________________________
V.26bis
2400/1200 bps modem standardized for use on the general switched
telephone network
FED-STD 1005
________________________________________________________________________________________________________
V.27bis
4800/2400 bps modem with automatic equalizer standardized for use
on leased telephone-type circuits
FED-STD 1006
________________________________________________________________________________________________________
V.27ter
4800/2400 bps modem standardized for use on the general switched
telephone network
FED-STD 1006
________________________________________________________________________________________________________
V.28
Electrical characteristics for unbalanced double-current interchange
circuits
RS-232C
________________________________________________________________________________________________________
(Continued)