Table d-1. some ccitt digital standards – AT&T DEFINITY 7200 series User Manual
Page 278

D-6
COMMUNICATIONS PROTOCOLS
_
___________________________________________________________________________________________________________________________
_
___________________________________________________________________________________________________________________________
_
___________________________________________________________________________________________________________________________
Table D-1. Some CCITT Digital Standards
________________________________________________________________________________________________________
Name Title
Equivalent
Standard(s)
________________________________________________________________________________________________________
________________________________________________________________________________________________________
X.1
International user classes of service in public data networks
ANSI X3.1; RS-269-B; FED-STD
1001; FIPS 22-1
________________________________________________________________________________________________________
X.2
International user services and facilities in public networks
INT-FED-STD 0001041
________________________________________________________________________________________________________
X.4
General structure of signals of international alphabet no. 5 code for
data transmission over public data networks
CCITT V.4; ISO 1155; ANSI X3.15;
FED-STD 1010; FIPS 16-1
________________________________________________________________________________________________________
X.20
Interface between data terminal equipment (DTE) and data circuit-
terminating equipment (DCE) for synchronous operation on public
data networks
None.
________________________________________________________________________________________________________
X.20bis
Use on public data networks of DTE which is designed for
interfacing to asynchronous duplex V.series modems
RS-232C
________________________________________________________________________________________________________
X.21
Interface between DTE and DCE for circuit-switched synchronous
operation on public data networks
None.
________________________________________________________________________________________________________
X.21bis
Use on public data networks of DTE which is designed for
interfacing to synchronous duplex V.series modems
RS-232C; RS-449
________________________________________________________________________________________________________
X.25
Interface between DTE and DCE for terminals operating in the
packet mode on the public data networks
INT-FED-STD 001041
________________________________________________________________________________________________________
X.27
Electrical characteristics for balanced double-current interchange
circuits for general use with integrated circuit equipment in the field
of data communications
CCITT V.11; RS-422A; FED-STD
1020A
________________________________________________________________________________________________________
X.28
DTE/DCE interface for a start-stop mode data terminal equipment
accessing packet assembly/disassembly facility (PAD) in a public
data network situated in the same country
None.
________________________________________________________________________________________________________
X.29
Procedures for the exchange of control information and user data
between a packet assembly/disassembly facility (PAD) and a packet
mode DTE or another PAD
None.
________________________________________________________________________________________________________
X.75
Terminal and transit call control procedures and data transfer system
on international circuits between packet-switched data networks
None.
________________________________________________________________________________________________________
X.96
Call progress signals in public data networks
INT-FED-STD 001041
________________________________________________________________________________________________________
X.400
Defines the model for the overall message handling environment (for
OSI layers 4-7)
None.
________________________________________________________________________________________________________