KROHNE TIDALFLUX 2300 F EN - Manual (Page 17)

ELECTRICAL CONNECTIONS
4
17
TIDALFLUX 2300 F
www.krohne.com 06/2013 - 4002490202 MA TIDALFLUX 2300 F R02 en
4.3 Connection of cables
The illustration shows the different connections and cable entries. View "p" shows (explicit) the
bottom entries for signal and field current cables into the connection box on the signal converter.
The diagrams for electrical connections and connection of mains supply, will be described on the
next pages.
Figure 4-1: Cable entries for electrical connection
1 View "p" of the connection box of the signal converter
2 Field current cable
3 Signal cable (DS or BTS)
4 Interface cable
5 Flow sensor
INFORMATION!
The next drawing shows the situation for a signal cable type BTS. In case of a signal cable type
DS, terminals 20 and 30 are not used.
Figure 4-2: Connection diagram
1 Connection box of converter
2 I/O connection box of sensor
3 Connection box of sensor
4 Connect the outer screens via strain reliefs