KEPCO RKE 1500W Series Operator Manual User Manual
Kepco, Operator’s manual, Rke 1500w series
Table of contents
Document Outline
- 1.1 Scope of Manual
- 1.2 Description
- FIGURE 1. Mounting Positions For The RKE 1500W Power Supply
- FIGURE 2. Mechanical Outline Drawing Of The RKE 1500W Power Supply
- TABLE 1. Output Ratings and Specifications
- FIGURE 3. Power Rating Vs. Temperature and Input Voltage
- TABLE 2. Power Supply Ratings and Specifications
- FIGURE 4. Locations Of Operating Controls, Indicators and Terminals
- 4.1 Voltage Adjustment
- 4.2 Remote Voltage Control
- TABLE 3. Remote Voltage (RV) Adjustment Range
- FIGURE 5. Connections For Remote Voltage Control
- 4.3 Remote Turn On-Turn Off
- 5.1 POWER FAIL Signal (Optical Coupler Output Alarm Circuit)
- FIGURE 6. Output Alarm Circuit Optically Isolated
- FIGURE 7. RKE 1500W Power Failure Timing Diagram
- 5.2 Overvoltage And Overtemperature Protection
- 5.3 current Limit/Overcurrent Protection
- 5.4 Fan Failure
- 5.5 Undervoltage
- 6.1 Connecting The Load
- FIGURE 8. Correct and incorrect Methods of Load Connection
- 6.2 Parallel Connection
- FIGURE 9. Parallel Connection with Current Balancing
- 6.2.1 Current Balancing
- 6.2.2 Master-Slave Configurations
- 6.2.2.1 Master-Slave, Multiple Loads
- FIGURE 10. Parallel Connection, Master-Slave, Multiple Loads
- 6.2.2.2 Master-Slave, Single Load
- FIGURE 11. Parallel Connection, Master-Slave, Single Load
- 6.3 Series Connection
- FIGURE 12. Series Connection
- 6.4 Preliminary Electrical Check
- FIGURE 13. Functional Checkout