In-Situ RDO PRO Process Optical Dissolved Oxygen Sensor Manual - Manual (Page 26)

11.0 Declaration of Conformity
Manufacturer: In-Situ, Inc.
221 East Lincoln Avenue
Fort Collins, CO 80524
USA
Declares that the following product:
Product name:
RDO PRO Optical Dissolved Oxygen Sensor
Model: RDO PRO Optical Dissolved Oxygen Sensor
Product Description: The RDO PRO measures dissolved oxygen and temperature in natural groundwater
and surface water.
is in compliance with the following Directives:
2004/108/EC for Electromagnetic Compatibility (EMC) Directive
73/23/EEC for Safety Directive
and meets or exceeds the following international requirements and compliance standards:
• Immunity
EN 61000-6-2, Electromagnetic Compatibility (EMC) – part 6-2: Generic standards – Immunity for
industrial environments
• Emissions
Class A requirements of CISPR 11: 2004, Specification for limits and methods of
measurement of radio disturbance characteristics of industrial, scientific and medical (ISM)
radio-frequency equipment
Supplementary Information:
The device complies with the requirements of the EU Directives 2004/108/EC and 73/23/EEC, and the CE
mark is affixed accordingly.
Bob Blythe
President and CEO
In-Situ Inc.
October 2, 2008
The presence of the Waste Electrical and Electronic Equipment (WEEE) marking on the product indicates that
the device is not to be disposed via the municipal waste collection system of any member state of the
European Union.
For products under the requirement of WEEE directive, please contact your distributor or local In-Situ Inc. office
for the proper decontamination information and take back program, which will facilitate the proper collection,
treatment, recovery, recycling, and safe disposal of the device.
26 Declaration of Conformity