HT instruments SIRIUS87 - Manual (Page 9)

SIRIUS 87
EN - 7
3. PREPARATION FOR USE
3.1. INITIAL CHECKS
This instrument has been checked mechanically and electrically prior to shipment.
Any care has been taken to ensure that the instrument reaches you under safe conditions.
You are recommended, however, to carry our a rapid check to detect any possible
damage which might have been caused during transport. Should this be the case, contact
immediately your dialer.
Check also that the packaging contains all the parts listed under § 9.3 . In case of
discrepancies contact the dealer.
In case you have to send the instrument back please follow the instructions reported in §
10.
3.2. POWER
SUPPLY
The instrument is supplied by 6x1.5V batteries type AA LR6 AM3 MN 1500 not included in
the package.
To replace batteries follow the instructions reported in § 8.2.
When batteries are low the symbol
is displayed. To replace batteries follow the
instructions indicated in § 8.2.
3.3. CALIBRATION
The instrument is compliance with the technical specifications listed in this manual. The
performance of the specifications are guaranteed for one year.
3.4. STORAGE
In order to grant the accuracy of the measurements, after a period of storage in extreme
environmental conditions, wait for the time necessary so that the apparatus is back to
normal measuring conditions (see § 9.2.1).