GW Instek GSP-827 Programming Manual - Manual (Page 6)

Copyright 2003 GOODWILL INSTRUMENT CO., LTD.
MEASure TRAce SWITCH AVeraGe 100 MEAS:TRA:SWITCH^AVG
OK
MEASure TRAce SWITCH PEAK 100 Assign the peak trace for dump trace
data. Refer to “MEAS:TRA:READ?” MEAS:TRA:SWITCH^PEAK
OK
MEASure TRAce SWITCH STORED 200 Assign the stored trace for dump
trace data. Refer to
“MEAS:TRA:READ?” MEAS:TRA:SWITCH^STORED^3
OK
MEASure TRAce SWITCH? 400 Query the trace for data dump MEAS:TRACE:SWITCH?
Live
MEASure TRAce READ? 1100 Dump the assigned trace data It is 501 points of 10 bit DAC (digital to analog
converter) data. The DAC value is from 0 to
1,023. MEAS:TRA:READ?
Live^=^{137, 140, … 135}
MEASure TRAce ATRAce off> 200 Set trace A on/off. MEAS:TRA:ATRA^ON
OK
MEASure TRAce ATRAce? 600 Query the status (on/off) of trace A MEAS:TRA:ATRA?
ON
MEASure TRAce BTRAce 300 Set trace B on/off MEAS:TRA:BTRA^OFF
OK
MEASure TRAce BTRAce? 600 Query the status (on/off) of trace B MEAS:TRA:BTRA?
OFF
MEASure TRAce MAXHold 200 Enable/Disable peak hold function of
trace MEAS:TRA:MAXH^ON
OK
MEASure TRAce MAXHold? 200 Query the status (on/off) of peak hold
function of trace MEAS:TRA:MAXH?
ON
MEASure TRAce AVeraGe COUNT 300 Assign the number of trace averaging 1 to 200 MEAS:TRA:AVG:COUNT^20
OK
MEASure TRAce AVeraGe COUNT? 800 Query the number of trace averaging MEAS:TRA:AVG:COUNT?
20
MEASure TRAce AVeraGe 300 Enable/Disable the trace average
function MEAS:TRA:AVG^ON
OK
MEASure TRAce AVeraGe? 400 Query the status (on/off) of trace
average function MEAS:TRA:AVG?
on
MEASure TRAce FREeze 200 Enable the trace freeze function MEAS:TRA:FRE^OFF
OK
MEASure TRAce FREeze? 500 Query the status (on/off) of trace
freeze function MEAS:TRA:FRE?
OFF
MEASure TRAce DETect Mode? 500 Query the trace detection mode MEAS:TRA:DET:M?
Normal