GW Instek GSP-827 Programming Manual - Manual (Page 11)

Copyright 2003 GOODWILL INSTRUMENT CO., LTD.
CONtrol SYStem DISPlay? 300 Query the display mode Normal, inverse CON:SYS:DISP?
Normal
CONtrol SYStem BACKlight 200 Turn the backlight on/off ON, OFF CON:SYS:BACK^ON
OK
CONtrol SYStem BACKlight? 200 CON:SYS:BACK?
ON
CONtrol SWEEPtime MODE? 300 Query the sweep time mode Auto/Manual CON:SWEEP:MODE?
Auto
CONtrol SWEEPtime 400 Set the sweet time mode CON:SWEEP^Auto
OK
CONtrol SWEEPtime? 400 Query the sweep time CON:SWEEP?
500.0 mS
CONtrol SWEEPtime 600 Assign the sweep time in manual
mode NOTE: It can be set only in manual mode CON:SWEEP^500^msec
OK
CONtrol TG 100 Set TG output ON/OFF CON:TG^ON
OK
CONtrol TG? 100 Query TG status (on/off) of TG. CON:TG?
ON
CONtrol TG NORM 200 Turn on/off the Normalization function CON:TG:NORM^ON
OK
CONtrol TG NORM? 300 Query the status (on/off) of TG
normalization CON:TG:NORM?
ON
CONtrol TG LEVEL dBm 100 Assign the TG output level in dBm -50.0 to 0.0 dBm
NOTE: The unit has to be dBm. CON:TG:LEVEL^ -10.0^dBm
OK
CONtrol TG LEVEL? 200 Query the TG level. CON:TG:LEVEL?
-10.0 dBm
CONtrol TG OFFSET 200 Assign the TG frequency offset -990.0 o 990.0 kHz CON:TG:OFFSET^-500^kHz
OK
CONtrol TG OFFSET? 200 Query the TG frequency offset CON:TG:OFFSET?
500 kHz
CONtrol TG REFlevel dBm 100 Assign the reference level of TG
output in dBm Any level within the display. For example, the
ange on display is –100 to –20dBm, it is the
range of TG reference level. CONtrol:TG:REF^-30^dBm
OK
CONtrol TG REFlevel? 300 Query the TG reference level CON:TG:REF?
-30 dBm
CONtrol TRIGger FREE 100 Set the trigger mode to Free
(non-trigger) mode CON:TRIG:FREE
OK