GW Instek GSP-827 Programming Manual - Manual (Page 12)

Copyright 2003 GOODWILL INSTRUMENT CO., LTD.
CONtrol TRIGger MODE? 300 Query trigger mode CON:TRIG:MODE?
Free
CONtrol TRIGger SINGLE 200 Set the trigger mode to single mode CON:TRIG:SINGLE
OK
CONtrol TRIGger MAN 200 CON:TRIG:MAN
OK
CONtrol TRIGger LEVEL 200 Assign trigger level Any level within the display. For example, the
display range is –100 to –20dBm, it is the range
of TG reference level. CON:TRIG:LEVEL^ -40^dBm
OK
CONtrol TRIGger LEVEL? 100 Query the Trigger level CON:TRIG:LEVEL?
-40.0 dBm
CONtrol TRIGger FREQ 100 Assign the trigger frequency. The
default is center frequency Any frequency within the span. CON:TRIG:FREQ^100^MHz
OK
CONtrol TRIGger FREQ? 100 Query the trigger frequency CON:TRIG:FREQ?
100 MHz
CONtrol TRIGger DELAY 100 Assign the trigger delay CON:TRIG:DELAY^100 usec
OK
CONtrol TRIGger DELAY? 400 Query the trigger delay CONtrol:TRIGger:DELAY?
100 usec
CONtrol TRIGger EXT 100 Set the trigger source to external CONtrol:TRIGger:EXT
OK
CONtrol DISPlay? 400 Query the display status (split
upper/split lower/full) CON:DISP?
Split upper
CONtrol DISPlay SPLIT 200 Set the display to split mode CON:DISP:SPLIT
OK
CONtrol DISPlay FULL 100 Set the display to full mode. CON:DISP:FULL
OK
CONtrol DISPlay UPPER 200 Set the upper display(in split mode)
on. CON:DISP:UPPER
OK
CONtrol DISPlay LOWER 200 Set the lower display(in split mode)
on. CON:DISP:LOWER
OK
CONtrol EXTREF FREQ 100 Assign the frequency of external
reference. 1=1MHz, 2=1.544MHz, 3=2.048MHz, 4=5MHz,
5=10MHz, 6=10.24MHz, 7=13MHz, 8=15.36MHz,
9=15.4MHz, 10=19.2MHz CON:EXTREF:FREQ^5
OK
CONtrol EXTREF FREQ? 300 Query the frequency of external
frequency CON:EXTREF:FREQ?
10 MHz
CONtrol BATTery? 300 Query the status (on/off) of battery CON:BATT?
Battery option not installed