GW Instek GSP-827 Programming Manual - Manual (Page 5)

Copyright 2003 GOODWILL INSTRUMENT CO., LTD.
MEASure PEAK TRACK? 100 ok MEAS:PEAK:TRACK?
MEASure TRAce SAVE 100 Assign the file (destination) number
for trace saving 1, 2, …100
Note: Before assign the file number, define the
source first. See the next command. MEAS:TRA:SAVE^2
OK
MEASure TRAce SAVE FROM 200 Assign the source for trace saving Live, TraceA, TraceB MEAS:TRA:SAVE:FROM:^Live
OK
MEASure TRAce SAVE FROM? 100 Query the source for trace saving MEAS:TRA:SAVE:FROM?
TRACEA
MEASure TRAce RECALL 100 Assign the file (source) number for
trace recall 1, 2, …100
Note: Before assign the file number, define the
destination first. See the next command. MEAS:TRA:RECALL:^5
OK
MEASure TRAce RECALL LOCation 100 Assign the destination for trace recall Live, TraceA, TraceB MEAS:TRA:RECALL:LOC^TraceA
OK
MEASure TRAce RECALL LOCation? 100 Query the destination for trace recall MEAS:TRA:RECALL:LOC?
OK
MEASure TRAce NAME
e>
100 Assign the trace for read. Refer to
MEAS:TRA:READ? From A~Z, length is 24 characters. MEAS:TRA:NAME^2^SYSTEMA
OK
MEASure TRAce NAME? 400 Query the trace name as assigned 1 to 100 MEAS:TRA:NAME?2
SYSTEMA (for example)
MEASure TRAce ERASE 100 Erase the identified trace 1 to 100 MEAS:TRA:ERASE^2
OK
MEASure TRAce DATE? 200 Query the date of saving trace as
assigned trace 1 to 100
MEAS:TRA:DATE?
OK
MEASure TRAce ERASE ALL 100 Erase all trace data in memory MEAS:TRA:ALL
OK
MEASure TRAce SWITCH LIVE 100 Assign the live trace for dump trace
data. Refer to “MEAS:TRA:READ?” MEAS:TRA:SWITCH^LIVE
OK
MEASure TRAce SWITCH TRACEA 100 Assign the trace A for dump trace
data. Refer to “MEAS:TRA:READ?” MEAS:TRA:SWITCH^TRACEA
OK
MEASure TRAce SWITCH TRACEB 100 Assign the trace B for dump trace
data. Refer to “MEAS:TRA:READ?” MEAS:TRA:SWITCH^TRACEB
OK
MEASure TRAce SWITCH UPPER 100 Assign the Upper (in spilt display)
trace for dump trace data. Refer to
“MEAS:TRA:READ?” MEAS:TRA:SWITCH^UPPER
OK
MEASure TRAce SWITCH LOWER 100 Assign the Lower trace for dump
trace data. Refer to
“MEAS:TRA:READ?” MEAS:TRA:SWITCH^LOWER
OK