GW Instek GSP-827 Programming Manual - Manual (Page 4)

Copyright 2003 GOODWILL INSTRUMENT CO., LTD.
MEASure REFLevel SCALE? 500 Query the amplitude scale MEAS:REFL:SCAL?
5
MEASure REFLevel UNIT 1000 Set the amplitude unit dBm, dBuV, dBmV, dB/Hz MEAS:REFL:UNIT^dBuV
OK
MEASure REFLevel UNIT? 500 Query the amplitude unit MEAS:REFL:UNIT?
dBuV
MEASure MARKer MODE 500 1 to turn MM mode on,
0 to turn MM mode off, 0,1 MEAS:MARK:MODE^1
OK
MEASure MARKer MODE? 500 Set selected marker(MM on) 0~9 MEAS:MARK:OFF^1
OK
MEASure MARKer ON 500 Set selected marker(MM on) , 0~9 MEAS:MARK:ON^1
OK
MEASure MARKer OFF 500 Set selected marker(MM on) 0~9 MEAS:MARK:OFF^1
OK
MEASure MARKer SELect 350 Select marker 0~9 MEAS:MARK:SEL^2
OK
MEASure MARKer SELect? 300 Query the number of marker selected MEAS:MARK:SEL?
MEASure MARKer FREQuency 500 Assign the marker frequency 9k~2.7GHz MEAS:MARK:FREQ ^1.3^GHz
OK
MEASure MARKer FREQuency
?
500 Query the reading of marker
frequency MEAS:MARK:FREQ?
1.3GHz
MEASure MARKer LEVEL? 100 Query the reading of marker level MEAS:MARK:LEVEL?
MEASure MARKer CENTER 200 Perform the “marker to center”
function MEAS:MARK:CENTER
OK
MEASure MARKer STATUS? 200 Query the ON/OFF status of selected
marker MEAS:MARK:STATUS?
MEASure PEAK CENTER 300 MEAS:PEAK:CENTER
OK
MEASure PEAK HIGHest 300 MEAS:PEAK:HIGHEST
OK
MEASure PEAK LEVel? 200 MEAS:PEAK:LEVEL?
MEASure PEAK TRACK ON 300 Ok MEAS:PEAK:TRACK^ON
OK
MEASure PEAK TRACK OFF 200 Ok MEAS:PEAK:TRACK^OFF
OK