GW Instek GDM-8200A DMM-Viewer (PC Software) Guide - Manual (Page 16)

GDM-8200A Series Remote Viewer Guide
16
M
EASUREMENT
1. Establish
remote
connection Follow the procedures for connection and
configuration on page11.
2. Select
measurement
item The front panel keys of the GDM825XA series and the
DMM viewer software is the same.
Press the measurement keys just like in the GDM series
front panel.
Any changes in DMM Viewer will be reflected on the
DMM.
For details on how to measure, please see the
GDM8200A series user manual.
Normal
measurements (Viewer software: dBm) (GDM panel: dBm)
For measurements that need keys to be pressed
at the same time on the DMM, need to be
pressed in quick succession on DMM Viewer
To select ACV + DCV or ACI + DCI, click on the
AC button and then immediately click on the DC
button.
Special
measurements
(Viewer software:
ACV+DCV)
2s<
(GDM panel: ACV+DCV)
3. Start
measurement After selecting the measurement type, click on the
START button to start the measurement. The result is
updated in real time in the display as well as in the data
field.