GW Instek GPT-9900 series Quick Start Guide - Manual (Page 22)

GPT-9000 Series Quick Start Guide
22
View Sweep Graph (Special MANU Test Mode)*
*GPT-9903 and GPT-9904 only.
 Press the SWEEP soft-key to view the sweep graph
after a special manual test has finished running.
 Press the ESC key to return the VIEW status.
Navigate Sweep Graph Results
 Use the scroll wheel to move the cursor to view the
results at any particular point in time.
 Press F5 or F6 to hide the first or second graph line.
W E E S P
ESC
View AUTO Mode Test Results
 Turn the scroll when clockwise to cycle through each
step result.
 Turn the scroll anticlockwise to return back to the
overview page.
Return to READY Status
 Press the STOP button
STOP
STOP Status
Description STOP status is shown when a MANU test or
AUTO test does not finish running and has
been stopped by the operator. When in STOP
status, pressing STOP will return the tester to
READY status.